Issue link: https://onenorgren.uberflip.com/i/1085681
For more information or for additional configurations, please contact us at NASInsideSales@imi-precision.com 51 PA S S-T H R O U G H D O U B L E B L A N K D E T E C T I O N ( DY N A M I C ) 3 For more information or for additional configurations, please contact us at NASInsideSales@imi-precision.com Single Channel DBP100 DBA Controller Dimensions Two Channel DBP200 DBA Controller Dimensions DOUBLE BLANK PASS THRU CONTROLLERS DBP100 / DBP200 » Controllers with single or two channel inputs » Compatible with both ferrous and non-ferrous material » All l/O source with PLC are 24 VDC from internal or seperate power that can be wired as a current sink or a current source » Up to 127 job storage » 120 VAC Maximum single sheet thickness measurement Ferrous: 3.3 mm Non-ferrous: 3.3 mm Typical measurement time* Less than 70 milliseconds *Note: Sensor faces must be totally covered by material for a minimum of 16 milliseconds Application » Ferrous or non-ferrous materials transmit through two pass sensors placed between 1" (25 mm) and 2" (50 mm) apart » Through a PLC job setup includes material type and thickness selection » One and two channel controllers are available » Each channel has independent measurement capabilities 7.94 (201.7) 6.50 (165.1) 7.19 (182.6) 4X ø 0.19 (4.8) 8.00 (203.2) 6.81 (173.0) 8.18 (207.8) 6.25 (158.8) 7.94 (201.7) 6.50 (165.1) 7.19 (182.6) 8.00 (203.2) 4X ø 0.19 (4.8) 6.81 (173.0) 8.18 (207.8) 10.75 (273.0) 7.94 (201.7) 6.50 (165.1) 7.19 (182.6) 4X ø 0.19 (4.8) 8.00 (203.2) 6.81 (173.0) 8.18 (207.8) 6.25 (158.8) 7.94 (201.7) 6.50 (165.1) 7.19 (182.6) 8.00 (203.2) 4X ø 0.19 (4.8) 6.81 (173.0) 8.18 (207.8) 10.75 (273.0) Pass Through Double Blank Analyzer To machine control PLC Technical Data Dimensions are for reference only